# Boa v0.94 configuration file
# File format has not changed from 0.93
# File format has changed little from 0.92
# version changes are noted in the comments
#
# The Boa configuration file is parsed with a lex/yacc or flex/bison
# generated parser.  If it reports an error, the line number will be
# provided; it should be easy to spot.  The syntax of each of these
# rules is very simple, and they can occur in any order.  Where possible
# these directives mimic those of NCSA httpd 1.3; I saw no reason to
# introduce gratuitous differences.

# The "ServerRoot" is not in this configuration file.  It can be compiled
# into the server (see defines.h) or specified on the command line with
# the -c option, for example:
#
# boa -c /usr/local/boa

# The "WorkingRoot" is the current working directory of boa, default is
# "ServerRoot" if undefined.

WorkingRoot /

# Port: The port Boa runs on.  The default port for http servers is 80.
# If it is less than 1024, the server must be started as root.

Port 8089

# DSCP: The DSCP value to set on outgoing packets. Used on QoS networks.
DSCP 0

# AlternatePort: Boa will also listen to this port if > 0.
AlternatePort 0

# Listen: the Internet address to bind(2) to.  If you leave it out, it
# takes the behavior before 0.93.17.2, which is to bind to all addresses
# (INADDR_ANY).  You only get one "Listen" directive, if you want service
# on multiple IP addresses, you have three choices:
#    1. Run boa without a "Listen" directive
#       a. All addresses are treated the same; makes sense if the addresses
#          are localhost, ppp, and eth0.
#       b. Use the VirtualHost directive below to point requests to different
#          files.  Should be good for a very large number of addresses (web
#          hosting clients).
#    2. Run one copy of boa per IP address, each has its own configuration
#       with a "Listen" directive.  No big deal up to a few tens of addresses.
#       Nice separation between clients.
# The name you provide gets run through inet_aton(3), so you have to use dotted
# quad notation.  This configuration is too important to trust some DNS.

#Listen 192.68.0.5

# User: The name or UID the server should run as.
# Group: The group name or GID the server should run as.

User root
Group root

# ServerAdmin: The email address where server problems should be sent.
# Note: this is not currently used, except as an environment variable for CGIs.

#ServerAdmin foo@bar.baz

# ErrorLog: The location of the error log file. If this does not start
# with /, it is considered relative to the server root.
# Set to /dev/null if you don't want errors logged.
# If unset, defaults to /dev/stderr

#ErrorLog /var/log/boa.log

# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"

# AccessLog: The location of the access log file. If this does not
# start with /, it is considered relative to the server root.
# Comment out or set to /dev/null (less effective) to disable
# Access logging.

#AccessLog /tmp/boa_access_log
# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"

# UseLocaltime: Logical switch.  Uncomment to use localtime
# instead of UTC time
UseLocaltime

# VerboseCGILogs: this is just a logical switch.
#  It simply notes the start and stop times of cgis in the error log
# Comment out to disable.
#VerboseCGILogs

# ServerName: the name of this server that should be sent back to
# clients if different than that returned by gethostname + gethostbyname

#ServerName www.your.org.here

# ConcealServerIdentity: Do not include the Server header in responses.
ConcealServerIdentity

# VirtualHost: a logical switch.
# Comment out to disable.
# Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
# become /var/www/IP-A.
# Example: http://localhost/ becomes /var/www/127.0.0.1
#
# Not used until version 0.93.17.2.  This "feature" also breaks commonlog
# output rules, it prepends the interface number to each access_log line.
# You are expected to fix that problem with a postprocessing script.

#VirtualHost

# DocumentRoot: The root directory of the HTML documents.
# Comment out to disable server non user files.

DocumentRoot /usr/html

# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is recieved.

#UserDir public_html

# DirectoryIndex: Name of the file to use as a pre-written HTML
# directory index.  Please MAKE AND USE THESE FILES.  On the
# fly creation of directory indexes can be _slow_.
# Comment out to always use DirectoryMaker

DirectoryIndex index.shtml

# DirectoryMaker: Name of program used to create a directory listing.
# Comment out to disable directory listings.  If both this and
# DirectoryIndex are commented out, accessing a directory will give
# an error (though accessing files in the directory are still ok).

#DirectoryMaker /usr/lib/boa/boa_indexer

# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
# has been commented out, the the on-the-fly indexing of Boa can be used
# to generate indexes of directories. Be warned that the output is
# extremely minimal and can cause delays when slow disks are used.
# Note: The DirectoryCache must be writable by the same user/group that
# Boa runs as.

# DirectoryCache /var/spool/boa/dircache

# KeepAliveMax: Number of KeepAlive requests to allow per connection
# Comment out, or set to 0 to disable keepalive processing

# KeepAliveMax 1000

# KeepAliveTimeout: seconds to wait before keepalive connection times out

KeepAliveTimeout 60

# MimeTypes: This is the file that is used to generate mime type pairs
# and Content-Type fields for boa.
# Set to /dev/null if you do not want to load a mime types file.
# Do *not* comment out (better use AddType!)

MimeTypes /etc/httpd/conf/mime.types

# DefaultType: MIME type used if the file extension is unknown, or there
# is no file extension.

DefaultType text/plain

# CGIPath: The value of the $PATH environment variable given to CGI progs.
# Default is /bin:/usr/bin:/usr/local/bin.

CGIPath /usr/bin:/bin

# SinglePostLimit: The maximum allowable number of bytes in
# a single POST.  Default is normally 1MB.
SinglePostLimit 8388608

# ClientStreamSize: Customized by Axis to handle POST over
# 8k.  Default is normally 8KB.

ClientStreamSize 16384

# MaxConnections defines the maximum number of concurrent connections
# that Boa will handle. Once Boa reaches this limit, it stops
# accepting connections until the number of active connections goes
# down. The default is the maximum number of available file descriptors.

MaxConnections 30

# AddType: adds types without editing mime.types
# Example: AddType type extension [extension ...]

# Uncomment the next line if you want .cgi files to execute from anywhere
#AddType application/x-httpd-cgi cgi

# Redirect, Alias, and ScriptAlias all have the same semantics -- they
# match the beginning of a request and take appropriate action.  Use
# Redirect for other servers, Alias for the same server, and ScriptAlias
# to enable directories for script execution.

# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example: Redirect /bar http://elsewhere/feh/bar

# Aliases: Aliases one path to another.
# Example: Alias /path1/bar /path2/foo

Alias /css /etc/language/css

# ScriptAlias: Maps a virtual path to a directory for serving scripts
# Example: ScriptAlias /htbin/ /www/htbin/

ScriptAlias /onvif/ /usr/html/onvif/
ScriptAlias /axis-cgi/ /usr/html/axis-cgi/
ScriptAlias /admin-bin/ /usr/html/admin-bin/

# PasswdFile: Set the path of the passwd file to use.
# Example: PasswdFile /etc/passwd
PasswdFile /etc/passwd

# ShadowFile: If the system uses a shadow file, provide the location of it.
ShadowFile /etc/shadow

# GroupFile: Set the path of the group file to use.
# Example: GroupFile /etc/group
GroupFile /etc/group

# GroupPolicy: Association between usergroup and the policy.
# Example: GroupPolicy admin http (http/https/both)
GroupPolicy admin http
GroupPolicy operator http
GroupPolicy viewer http

# Realm: Association between realm name and group
# Example: Realm Administrator admin
Realm Administrator admin
Realm Operator admin
Realm Operator operator
Realm Viewer admin
Realm Viewer operator
Realm Viewer viewer
Realm PTZOperator ptz
Realm Upnp viewer
Realm Wsd wsd

# ProtRealm: Protection by password or anonymous
# Example: ProtRealm Viewer anonymous
ProtRealm Administrator password
ProtRealm Operator password
ProtRealm Viewer password
ProtRealm PTZOperator password
ProtRealm Upnp anonymous
ProtRealm Wsd password

# Boa can transfer request to external daemons. A transfer is made when
# boa finds a match with files defined with Transfer or the requested
# documents extension matches a MIME type defined with TransferMime.
# Note: The extension must be mapped to the MIME type in mime.types.
# Example: TransferMime text/x-server-parsed-html /var/run/ssid/ssidsocket
# Example: Transfer /axis-cgi/io/input.cgi /var/run/iod/iodsocket

TransferMime text/x-server-parsed-html /var/run/ssid/ssidsocket
TransferMime application/x-rtsp-tunnelled /var/run/monolith/transfer

Transfer /axis-cgi/io/port.cgi  /var/run/iod/iodsocket
Transfer /axis-cgi/io/input.cgi  /var/run/iod/iodsocket
Transfer /axis-cgi/io/output.cgi  /var/run/iod/iodsocket

Transfer /axis-cgi/io/virtualinput.cgi /var/run/iod/iodsocket

TransferCgi /axis-cgi/admin/flash
TransferCgi /axis-cgi/admin/firmwareupgrade.cgi
TransferCgi /axis-cgi/admin/file_upload.cgi
TransferCgi /axis-cgi/admin/langupload.cgi
TransferCgi /axis-cgi/operator/call_overlay_upload.cgi
TransferCgi /axis-cgi/admin/upload_certificate.cgi
TransferCgi /axis-cgi/flash
TransferCgi /axis-cgi/firmwareupgrade.cgi
TransferCgi /axis-cgi/file_upload.cgi
TransferCgi /axis-cgi/admin/langupload.cgi
TransferCgi /axis-cgi/call_overlay_upload.cgi
TransferCgi /axis-cgi/upload_certificate.cgi

# JPEG related
Transfer /onvif-cgi/jpg/image.cgi /var/run/monolith/transfer
Transfer /axis-cgi/jpg/image.cgi /var/run/monolith/transfer
Transfer /axis-cgi/mjpg/video.cgi /var/run/monolith/transfer
Transfer /axis-cgi/mjpg/video.swf /var/run/monolith/transfer
Transfer /jpg/image.jpg /var/run/monolith/transfer
Transfer /jpg/1/image.jpg /var/run/monolith/transfer
Transfer /jpg/2/image.jpg /var/run/monolith/transfer
Transfer /jpg/3/image.jpg /var/run/monolith/transfer
Transfer /jpg/4/image.jpg /var/run/monolith/transfer
Transfer /jpg/5/image.jpg /var/run/monolith/transfer
Transfer /jpg/6/image.jpg /var/run/monolith/transfer
Transfer /jpg/7/image.jpg /var/run/monolith/transfer
Transfer /jpg/8/image.jpg /var/run/monolith/transfer
Transfer /jpg/quad/image.jpg /var/run/monolith/transfer
Transfer /mjpg/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/1/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/2/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/3/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/4/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/5/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/6/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/7/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/8/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/quad/video.mjpg /var/run/monolith/transfer
Transfer /mjpg/video.swf /var/run/monolith/transfer
Transfer /mjpg/1/video.swf /var/run/monolith/transfer
Transfer /mjpg/2/video.swf /var/run/monolith/transfer
Transfer /mjpg/3/video.swf /var/run/monolith/transfer
Transfer /mjpg/4/video.swf /var/run/monolith/transfer
Transfer /mjpg/5/video.swf /var/run/monolith/transfer
Transfer /mjpg/6/video.swf /var/run/monolith/transfer
Transfer /mjpg/7/video.swf /var/run/monolith/transfer
Transfer /mjpg/8/video.swf /var/run/monolith/transfer
Transfer /mjpg/quad/video.swf /var/run/monolith/transfer


# Bitmap related
Transfer /axis-cgi/bitmap/image.bmp /var/run/monolith/transfer
Transfer /axis-cgi/bitmap/image.cgi /var/run/monolith/transfer
Transfer /bitmap/image.bmp /var/run/monolith/transfer
Transfer /bitmap/1/image.bmp /var/run/monolith/transfer
Transfer /bitmap/2/image.bmp /var/run/monolith/transfer
Transfer /bitmap/3/image.bmp /var/run/monolith/transfer
Transfer /bitmap/4/image.bmp /var/run/monolith/transfer
Transfer /bitmap/5/image.bmp /var/run/monolith/transfer
Transfer /bitmap/6/image.bmp /var/run/monolith/transfer
Transfer /bitmap/7/image.bmp /var/run/monolith/transfer
Transfer /bitmap/8/image.bmp /var/run/monolith/transfer
Transfer /bitmap/quad/image.bmp /var/run/monolith/transfer

# Audio related
ScriptAlias  /axis-cgi/audio/getparam.cgi /usr/html/axis-cgi/audio/getparam.cgi
Transfer     /axis-cgi/audio/receive.cgi  /var/run/monolith/transfer
TransferPost /axis-cgi/audio/transmit.cgi /var/run/monolith/transfer

# Need common cgi domain for ptz to handle cookie testing smoothly
Transfer /axis-cgi/com/ptzconfig.cgi /var/run/ptz/vapixdsocket
Transfer /axis-cgi/com/ptzqueue.cgi /var/run/ptz/vapixdsocket
Transfer /axis-cgi/com/ptz.cgi /var/run/ptz/vapixdsocket
Transfer /axis-cgi/com/ptzcalibrate.cgi /var/run/ptz/vapixdsocket
Transfer /axis-cgi/com/serial.cgi /var/run/ptz/vapixdsocket

# Motion Detection specific configurations of Boa
ScriptAlias /axis-cgi/motion/ /usr/html/axis-cgi/motion/
Transfer /axis-cgi/motion/motiondata.cgi /var/run/motion/datasocket

# Release Info
ScriptAlias /axis-release/ /usr/html/axis-release/

# Active X decoder directory
ScriptAlias /activex/decoder/ /usr/html/activex/decoder/

# Recordings
Transfer /axis-cgi/record/continuous.cgi /var/run/monolith/transfer
ScriptAlias  /axis-cgi/record/download.cgi /usr/html/axis-cgi/record/download.cgi
Transfer /axis-cgi/record/repair.cgi /var/run/indexer/transfer
Transfer /axis-cgi/record/list.cgi /var/run/indexer/transfer 
Transfer /axis-cgi/record/listblocks.cgi /var/run/indexer/transfer
Transfer /axis-cgi/record/play.cgi /var/run/monolith/transfer
Transfer /axis-cgi/record/record.cgi /var/run/monolith/transfer
Transfer /axis-cgi/record/remove.cgi /var/run/indexer/transfer 
Transfer /axis-cgi/record/lock.cgi /var/run/indexer/transfer 
Transfer /axis-cgi/record/stop.cgi /var/run/monolith/transfer 
Transfer /axis-cgi/record/start.cgi /var/run/monolith/transfer 
# StreamCache
#Transfer /axis-cgi/streamcache/streamcache.cgi /var/run/monolith/transfer
ScriptAlias  /axis-cgi/streamcache/streamcache.cgi /usr/html/axis-cgi/streamcache/streamcache.cgi
ScriptAlias  /axis-cgi/streamcache/add.cgi /usr/html/axis-cgi/streamcache/add.cgi
ScriptAlias  /axis-cgi/streamcache/list.cgi /usr/html/axis-cgi/streamcache/list.cgi
ScriptAlias  /axis-cgi/streamcache/update.cgi /usr/html/axis-cgi/streamcache/update.cgi
ScriptAlias  /axis-cgi/streamcache/remove.cgi /usr/html/axis-cgi/streamcache/remove.cgi

# Device management
Transfer /axis-cgi/disks/list.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/format.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/lock.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/mount.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/repair.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/job.cgi /var/run/disks/transfer
Transfer /axis-cgi/disks/checkdisk.cgi /var/run/disks/transfer
ScriptAlias /axis-cgi/iscsi.cgi /usr/html/axis-cgi/iscsi.cgi

# User name of an anonymous user.
AnonymousUser anonymous

Transfer /axis-cgi/opticssetup.cgi /var/run/focusd/transfer

Transfer /axis-cgi/temperaturecontrol.cgi /var/run/temperature_ctrld/transfer

# Post-Mortem debug archive
Transfer /axis-cgi/debug/debug.tar /var/run/dbg-cgi/ctrl-cgi-socket
Transfer /axis-cgi/debug/debug.tgz /var/run/dbg-cgi/ctrl-cgi-socket

# Web service dispatcher
TransferPostWS /onvif/device_service /var/run/wsd/transfer
TransferPostWS /onvif/services /var/run/wsd/transfer